Makita BDF452HW 18 Volt Compact Lithium-Ion Driver Drill Kit

Makita  BDF452HW 18 Volt Compact Lithium-Ion Driver Drill KitManufacturer: Makita
Model: MAKBDF452HW
Rating: (69 reviews)

List Price: $368.00
Offer Price: $198.99
Buy from Amazon.com

Features:

  • Lithium Ion battery technology – Charges in only 15 minutes
  • 1/2″ Keyless Chuck with shaft lock for tighter securing bits for professional demands
  • Makita built 4 pole motor design for high performance lasts 5 times longer than competitive motors
  • Built in LED light to light up the work area
  • 16 Position Clutch

Amazon.com Review
Experience the power and reduced weight of the new lithium-ion technology, without the high cost. Lithium-ion cordless tools provide more power with less weight. This cordless drill-driver is a more compact, lighter-weight version of the LXT 18 volt tool. It has a 1.5 amp hr battery, which is half the size of the LXT 3.0 Amp hr batteries. This is not a light-duty tool by any means; it kicks butt in the 18-volt category. It boasts 450 in./lbs. of torque! You can even use the longer run time 18-volt LXT 3.0 Amp-hr batteries in this tool (the higher the amp hr rating, the longer the battery will last before it needs to be recharged).

This cordless drill weighs only 3.5 pounds, the lightest yet of any professional 18 volt. It has a comfortable grip and excellent ergonomics, which is ideal for continual use. Located just above the trigger, are two “headlights.” Headlights refer to small LED lights that provide light where you need it most. I was skeptical about this feature, thinking it was just another gimmick, but after using it for some time, I’ve come to depend on it. From lighting my way to the house in the dark, when bringing the batteries/tools on cold nights to providing light in a dark cabinet, closet, or under a desk, this a must-have feature. Rubber grips adorn the exterior of this tool and protect it during impact if it falls. For all that you get with this tool package, the price is unbelievably low. This 18 volt is perfect for the professional who needs a powerful cordless to use all day long.

This Makita drill also has the most advanced charging system available and it charges in only 15 minutes! Generically, it’s called a “smart charging system.” A computer chip inside the battery lets the charger know exactly how to optimally charge the battery, to completely charge each cell within the battery and for maximum battery life. Each battery is made up of smaller 1.2 volt cells. Often a battery will drain unevenly during normal use, at different rates within these internal cells. A normal charger will stop charging the battery when one cell reaches maximum capacity, not all of them. Once this happens once, it will continue to do so as long as you use the battery. What this means is your 18-volt battery is now a 16- or 17-volt battery and it can drop even lower. A “smart charger” will charge every cell independently until each cell is fully charged, so your 18-volt battery will remain 18 volts for its entire life. This charger has a fan in it and blows air through the battery to cool it down before charging so the battery can be charged right away, unlike other brands, where the charger waits until the battery cools, or even worse attempts to charge a hot battery pack and damages it or decreases the life of the battery. These Makita lithium-ion batteries will last longer than standard batteries and can be charged over 1200 times, as opposed to the standard of 600 to 800 times, which alone can justify the slightly higher price tag. — Gabriel Shantara Ford

What’s in the Box
Driver drill; compact lithium-ion batteries (2); 15-minute Rapid Charger; carrying case
Similar Products:

Dremel 400-6/90 Variable Speed XPR Rotary Tool Kit With 90 Accessories

Dremel 400-6/90 Variable Speed XPR Rotary Tool Kit With 90 AccessoriesManufacturer: Dremel
Model: 400-6/90
Rating: (55 reviews)

List Price: $240.00
Offer Price: $119.00
Buy from Amazon.com

Features:

  • The most complete XPR Kit available!
  • Features XPR Planer attachment, MultiSaw, FlexLite, Flex Shaft, Cutting Guide & Circle Cutting Jig
  • Includes XPR Storage Case plus 90 Accessories in their own integrated storage area
  • Variable speed provides maximum control and precision
  • Permanent magnet motor for increased performance and consistent speed at all speed settings

Product Description
Dremel 400 Series XPR Rotary Tool Plus, Attachments Included: XPR Deluxe Storage Case, XPR Multisaw, XPR Planer, Flex Shaft, Flex Lite, Cutting Guide, Circle Cutter & 90 Assorted Accessories.
Amazon.com
The Dremel rotary tool idea was great to begin with, but now, they’ve revved up the basic rotary tool and added some exclusive attachments that make the XPR series one of the coolest tools we get to try.

This one’s got all the bells and whistles of previous models and tackles the same tasks: you can carve, grind, polish, trim, sand, cut a wide range of material, shape, sharpen, clean, remove grout, smooth, drill, rout, sculpt, engrave, strip finishes. Similarly, it has Dremel’s huge array of accessory possibilities and the variable speed (from 5,000 to 35,000 rpm), but it has almost twice the amperage of its predecessors for plenty of power. In addition, the speed selector switch is separate from the power switch, allowing you to leave the tool at a certain speed setting for next time. Its design is a bit of departure, and that’s a matter of user preference, but after some getting-used to, we like it.

The primary reason you’d step up to this model from another rotary, though, is the plethora of great attachments made only for the XPR that emulate shop full of tools. Hands down, our favorite is the MultiSaw. Just attach it and your rotary tool becomes a mini reciprocating saw, making straight and curved cuts in a variety of materials. Using standard jigsaw blades, you can cut soft and hard wood, ply, metal, PVC, plastic and more.

Next, there’s the planer head that turns your Dremel into a portable planer. It’s designed for two types of planing – straight and at 45 degrees, with a width capacity of 2-1/8 inches, perfect for a warped or sticking door. Though we didn’t try any shaping or carving with it, we think it would do a great job of it, too. There’s also a flex light exclusive to this series that dovetails easily into a groove on the rear of the tool. It’s powered by lithium ion batteries (included) and does a fantastic job illuminating detailed work pieces. As with all the other Dremel rotaries, you can attach the flex shaft for super-fine detail work as well as reaching into places practically no tool has gone before. The circle cutter’s easy to use, too, and works like a charm, giving you perfect circular cutouts every time. And everything has its place in the well-designed storage case, making the whole shebang perfectly portable. If you’re a rotary tool fan, you’ll love the XPR. –Kris Jensen-Van Heste
Similar Products:

Dremel MultiPro Cordless 7700-02 20,000 RPM Two-Speed 7.2V Rotary Tool System w/50 Accessories

Dremel MultiPro Cordless 7700-02 20,000 RPM Two-Speed 7.2V Rotary Tool System w/50 AccessoriesManufacturer: Dremel
Model: 7700-02
Rating: (21 reviews)

List Price: $74.80
Offer Price: $36.20
Buy from Amazon.com

Features:

  • Cordless rotary tool with 50 accessories; 7.2 volts; two speeds (5,000 and 10,000 rpm)
  • Ball-bearing shaft for smooth, low-vibration operation; bit changes with no wrench
  • Lightweight, durable plastic housing
  • Includes rotary tool, 50 accessories, 3-hour charger, case
  • Lightweight 9 ounces; 2-year warranty

Product Description
Ready to go on a minute’s notice, this two-speed cordless tool and the 50 included bits are perfect for a wide variety of do-it-yourself jobs inside or out. Capable of doing almost anything the standard MultiPro does – except plug into an electrical outlet or accept attachments – you’ll want to keep it charged up and handy at all times.

 

Amazon.com Review
Built for the do-it-yourselfer, Dremel’s cordless MultiPro kit delivers the versatility you expect from a Dremel–with the added advantage of being cordless. Lightweight at only 9 ounces, this compact unit maneuvers comfortably in tight spaces. What will you use it for? Remove old grout in your bathtub, polish your flatware, remove a broken tile, etch glass, hang miniblinds, cut out a pet door, install a new car stereo, sand off a spot of hard-to-reach rust, clean your boat’s outboard engine parts, refinish ornate woodwork, install a mortise lock, and much, much more. The kit comes with 50 bits, including a high-speed cutter, a bristle brush, a cutoff wheel, sanding discs, a felt polishing wheel, a grinding wheel, and more–all the tools you need to tackle projects around the home. The tool’s ball-bearing shaft affords minimal vibration. The shaft-lock button and unique knurled collet nut make changing bits easy, too, with no wrench required. A three-hour battery charger and a carrying case are included. –Jon Groebner
Similar Products:

Stanley Consumer Storage 014725M 25 Compartment Professional Organizer

Stanley Consumer Storage 014725M 25 Compartment Professional OrganizerManufacturer: Stanley Consumer Storage
Model: 014725M
Rating: (9 reviews)

List Price: $20.99
Offer Price: $14.99
Buy from Amazon.com

Features:

  • Removable cup compartments in 3 different sizes
  • Unique lid design ¿ locks all compartments in place
  • Built-in wide handle for easy and stable portability
  • Heavy-duty latches ensure the lid will not flip open
  • Comfy-grip handle

Similar Products:

Denali 3.6V Lithium-Ion Cordless Screwdriver Kit

Denali 3.6V Lithium-Ion Cordless Screwdriver KitManufacturer: Denali
Rating: (86 reviews)

List Price: $49.99 Buy from Amazon.com

Features:

  • Compact/lightweight design makes working in tight spaces easier
  • Lithium ion battery technology provides 20% more torque and holds a charge for up to 1-1/2 years
  • Nose mounted LED light provides added light source
  • Equipped with battery level indicator lights and a comfortable cushion grip handle
  • Includes durable carrying/storage case featuring a built in 17 piece accessory set, this item will need to be charged prior to using

Amazon.com Review
Don’t be fooled by its compact size, the Denali 3.6-volt lithium ion cordless screwdriver is a powerful tool for serious do-it-yourselfers. The ergonomically designed pistol-grip tool fits into the palm of your hand and weighs a mere 13 ounces. At its heart is a high-tech lithium-ion rechargeable battery that delivers 20 percent more torque—that is, turning power—than comparable nickel-cadmium batteries.

And if you’re tried of battery-powered tools that are always dead when you need them, you’re going to love this Denali screwdriver: its lithium-ion battery will hold a charge for over 18 months! Leave it in your desk, under the kitchen sink, or on your workbench, and this little powerhouse will always be ready when you are. It takes about 10 hours to fully charge the battery the very first time, but after that, recharging takes between five and seven hours. The tool has a series of three battery indicator lights that lets you know when recharging is required.

The Denali 3.6-volt Lithium Ion Cordless Screwdriver is ideal for all light- to medium-duty screw-driving and hole-drilling chores, including hanging curtain rods, drilling pilot holes for nails or screws, assembling furniture and toys, installing window shades, attaching cabinet hinges and door pulls, and countless other home repair and improvement projects. It’s even equipped with an LED work light that makes it easy to work in dark spaces. The tool comes in a convenient zippered nylon case, along with the plug-in charger, and a 17-piece accessory kit (five titanium-coated drill bits, and 12 assorted screw-driving tips). –Joseph Truini

What’s In The Box: Denali 3.6-volt lithium-ion cordless screwdriver, zippered storage case, plug-in charger, 17-piece accessory kit
Similar Products:

Black and Decker PD600 Pivot Plus 6-Volt Nicad Cordless Screwdriver with Articulating Head

Black and Decker PD600 Pivot Plus 6-Volt Nicad Cordless Screwdriver with Articulating HeadManufacturer: Black & Decker
Model: PD600
Rating: (104 reviews)

List Price: $50.10
Offer Price: $24.99
Buy from Amazon.com

Features:

  • 6-volt Ni-Cad cordless screwdriver with articulating head
  • 2 speeds for screwdriving and drilling; 3-position pivoting action
  • Rugged, lightweight plastic casing for real-world conditions; easy-grip handle
  • Includes battery, charger, 1/16-inch pilot bit, double-ended screwdriving bit
  • 12.6 by 2.3 by 11.2 inches; 2.8 pounds; 2-year warranty

Amazon.com
We can’t think of anything we’d want to add to this little hummer. It’s incredible what B&D has engineered into this system (we don’t think it’s fair to call it a “screwdriver”). Dual speed range lets you drill holes at high speed and drive screws at the slower speed. A 23-position clutch, just like what’s on the big boys, will keep you from stripping your screws. But get this: Unlike conventional cordless screwdrivers and regular power drills, this tool’s handle easily locks in three positions for tight areas and awkward spots. Genius! And just like the “real” drills, this one’s got an accessible forward/reverse rocker switch for backing screws out, too. Here’s something, though, that the big-boy drill makers should pick up: It’s got on integrated light so you can always see your work surface clearly. For the money, we haven’t seen anything like it. –Kris Jensen-Van Heste
Similar Products:

Black & Decker ASI300 Air Station Inflator

Black & Decker ASI300 Air Station InflatorManufacturer: Black & Decker
Model: ASI300
Rating: (52 reviews)

List Price: $90.06
Offer Price: $49.50
Buy from Amazon.com

Features:

  • 120 volt air station for inflating tires, balls, mattresses
  • Automatically shuts off at desired air pressure; inflates up to 200 psi
  • Compact design for storage in car, boat, tractor, garage
  • Includes standard tire nozzle, needle inflator, extension nozzle
  • 2-year manufacturer warranty

Amazon.com Review
Running back and forth to the gas station to fill up car and bike tires, lawnmower wheels, boat trailers, and all those things that tend to go flat in the off season can get, well, tiresome. Cut out the back and forth with Black & Decker’s air station inflator. This handy unit plugs into any 120 volt outlet in the shop, or garage to quickly and conveniently pump up sports balls, tires, air mattresses and more. It also plugs into auto cigarette lighters and doesn’t take up much space in the car, boat, or camper for inflating sleeping pads and tires. The inflator easily inflates tires up to 200 psi. And, there’s no more guessing when the tire is filled to capacity. The inflator is equipped with Black & Decker’s EZ air dial that automatically shuts off once you’ve hit the desired psi. Convenient on-board cord, needle, and hose storage keeps all the goods in one place so that you don’t have to hunt down the needle to take care of that hard-to-bounce basketball. –Brian D. Olson

What’s in the Box
Standard tire nozzle, needle inflator, extension nozzle.
Similar Products:

Tool Band-It Magnetic Arm Band – Black

Tool Band-It Magnetic Arm Band - BlackManufacturer: Tool Band-It
Rating: ( reviews)

List Price: $19.99 Buy from Amazon.com

Features:

  • Tools have never been so handy
  • Just wrap this magnetic band around your arm and attach your pliers, screws and nails so they’re always within easy reach
  • Covered with PVC polyknit fabric
  • 1 size fits most adults

Similar Products:

DEWALT DW723 Miter Saw Stand

DEWALT DW723 Miter Saw StandManufacturer: Dewalt
Model: DW723
Rating: (157 reviews)

List Price: $423.56
Offer Price: Too low to display
Buy from Amazon.com

Features:

  • Heavy Duty Construction
  • Supports up to 16-feet of material and 400 pounds
  • Aluminum construction; non-marring feet; some assembly required
  • Includes 2 convertible work supports/stops
  • 75 by 11 by 8.8 inches; 5-1/2-foot beam; 35 pounds; 3-year warranty

Similar Products:

Product Description
,Universal design works with all brands of miter saws ,Lightweight aluminum construction (35 lbs.) ,5 1/2″ beam extends to support up to 16 ft. of material and up to 400 lbs. ,work stops/supports can be repositioned quickly anywhere along the rail
Amazon.com Review
Tired of transporting a bulky miter saw stand from one job site to the next? The DeWalt DW723 may be the answer. Lightweight and rugged, the all-aluminum stand measures a mere 5-1/2 feet out of the box and weighs in at just 38 pounds. However, when fully assembled, it can support boards up to 16 feet long and a full 400 pounds of weight. The key to its strength lies in the stand’s retractable legs, which lock securely in place then tuck away when not in use, as well as its sliding cam-lock extensions, which provide a full 16 feet of length when assembled. A carrying handle makes the stand easy to transport when fully retracted. Just throw it in the back of your pickup and it’s good to go. Assembly is quick and easy, too. We had ours up and running in a matter of seconds. Mounting brackets adjust to fit most miter saws, making this the ideal workspace for the professional or do-it-yourselfer on the go. –Carl Thress

Black and Decker WM425 Workmate 425 550 Pound Capacity Portable Work Bench

Black and Decker WM425 Workmate 425 550 Pound Capacity Portable Work BenchManufacturer: Black & Decker
Model: WM425
Rating: (62 reviews)
List Price: $159.92
Our Price: $84.98
Buy from Amazon.com
Features
:

  • Workmate portable project center; holds up to 550 pounds; folds for storage
  • Portable workbench and vise with one-handed clamp system
  • Steel construction and rubber feet
  • Includes insert to convert vise to workbench, extra block, four swivel pegs
  • 29.2 by 8.9 by 29.5; 48 pounds; 2-year warranty

Product Description
Workmate&tmreg. 425 Workbench, 1 Handed Clamp Portable Project Center, Front Jaw Swings Up For Vertical Clamping, Folds For Easy Storage, Holds Up To 550 LB.
Amazon.com Review
The Black & Decker Workmate Project Center might just be the item you need to make your home shop complete. Its versatility makes it an especially ideal choice for those with limited shop floor space: use it as a workbench, a bench tool stand, a vise, or a sawhorse, then quickly break it down and store it out of the way. Because it’s lightweight and portable, you can move it conveniently wherever it’s needed. The one-handed vise clamp system, with its exclusive clutch design, provides quick and easy clamping. The Workmate also features an extra block to expand your work surface, four swivel pegs, and an adjustable front jaw that swings up for vertical clamping. Its legs fold under to provide the lower height and stability needed when you’re using it as a base for bench tools, and its all-steel construction and rubber feet ensure a stable, strong work surface that supports up to 550 pounds. All in all, we were pretty impressed. With features like these, it’s no wonder the Workmate is a popular choice for light-duty and home shop use. –Tim Block