Tag Archives: Power & Hand Tools

Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser

April 1, 2008 – 4:41 am

Manufacturer: Hitachi Model: C10FSH Rating: (71 reviews) List Price: $1,015.00 Offer Price: $429.99 Features: Powerful 10-inch sliding dual compound miter saw with adjustable laser marker, electronic speed control, and soft start to reduce noise and recoil 12 amp motor; 3,800 rpm; 10 positive stops for quick settings; pivoting fence to support the work piece Stainless […]

By saurabh | Posted in Power Tools | Also tagged , , , , , , , , , , , , , , , , , , | Comments (5)

Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand

April 1, 2008 – 2:37 am

Manufacturer: Bosch Model: 4100-09 Rating: (16 reviews) List Price: $1,136.00 Offer Price: $599.00 Features: Squarelock rip fence engineered for maximum trueness 4. Includes the new enhanced award-winning gravity rise stand by Bosch Durable Sub-Base increases tool life by handling job-site abuse Integrated carry handles increase portability Single point bevel movement for consistent accuracy; 1-year warranty […]

By saurabh | Posted in Power Tools | Also tagged , , , , , , , , | Comments (5)

JET 708315BTC JBTS-10BT-3 15 Amp Benchtop Table Saw

March 30, 2008 – 4:38 am

Manufacturer: JET Model: 708315BTC Rating: (19 reviews) List Price: $242.00 Offer Price: $197.80 Features: 10-inch benchtop table saw Belt-drive operation and 15 amps; cutting capacity up to 24-1/2-inches; 5/8-inch arbor Steel corner posts; assembly required Includes saw, miter gauge, rapid wing extension, rear outfeed support, 2 wrenches for assembly 27 by 20 inch table; 62 […]

By saurabh | Posted in Power Tools | Also tagged , , , , , , , , , , , | Comments (5)

Thomas T-635HT Renegade Air Compressor

March 30, 2008 – 4:15 am

Manufacturer: Thomas Compressors Model: T-635HT Rating: (6 reviews) List Price: $399.00 Offer Price: $309.99 Features: Lightweight – 27 lbs. Quiet – 69 decibels Powerful – 135 PSI 6 Amps – Runs anywhere Includes regulator and gauge Similar Products: Campbell Hausfeld MP520010AV 25-Piece Accessory Kit with Case Hitachi NT65MA3 2 1/2-Inch 15 Gauge Finish Nailer Milwaukee […]

By saurabh | Posted in Power Tools | Also tagged , , | Comments (5)

JET 708457DXK JJ-6CSDX 6-Inch 1 Horsepower Jointer with Quick-Set Knive System, 115/230-Volt 1 Phase

March 30, 2008 – 3:09 am

Manufacturer: JET Model: 708457DXK Rating: (14 reviews) List Price: $808.00 Offer Price: $549.99 Features: Extra-Long cast iron table for better control and more accuracy 1/2″ Rabbeting Capacity; 33-1/8-inch long fence with 45 and 90 degree stopes Powerful 1 horsepower motor; Industrial push button controls 3 high-speed steel knives in the cutter head; Quick Set Knives […]

By saurabh | Posted in Power Tools | Also tagged , , , , , , , , , | Comments (5)

GREX P6/35-2.5 23 Gauge 1-3/8-Inch Length Headless Pins (2,500 per box)

March 29, 2008 – 2:42 am

Manufacturer: Grex Power Tools Model: P6/35-2.5 Rating: (2 reviews) List Price: Offer Price: $11.00 Similar Products: GREX P6/25-2.5 23 Gauge 1-Inch Length Headless Pins (2,500 per box) GREX P635 23 Gauge 1-3/8-Inch Length Headless Pinner GREX P6/20-2.5 23 Gauge 3/4-Inch Length Headless Pins (2,500 per box) GREX P6/12-2.5 23 Gauge 1/2-Inch Length Headless Pins (2,500 […]

By saurabh | Posted in Hardware | Also tagged , , , , , , , , | Comments (2)

Bostitch N80CB-1 Round Head 1-1/2 to 3-1/4-Inch Coil Framing Nailer

March 28, 2008 – 4:28 am

Manufacturer: Bostitch Model: N80CB-1 Rating: (20 reviews) List Price: $249.66 Offer Price: $249.66 Features: Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing Contact-trip trigger; large-capacity magazine Aluminum housing Accomodates nails from 1-1/2 to 3-1/4 inches Weighs just 8 pounds; 7-year warranty; made in the USA Amazon.com Review A popular model […]

By saurabh | Posted in Air Tools | Also tagged , , , , , , , , , , , , | Comments (5)

Senco A201509 18-Gauge by 1-1/2 Inch Brad Electro Galvanized Brads

March 28, 2008 – 4:03 am

Manufacturer: Senco Model: A201509 Rating: ( reviews) List Price: $3.19 Offer Price: $2.07 Features: 800 Brads per pack Great for mouldings picture frame assembly trim and cabinetry building Fewer tool jams than competitors Highest withdrawal values for fasteners Product Description 800 Pack, 1-1/2″ Brad Nail, 18 Gauge, Fits A200BN AccuSet Brad Nailers, Applications Include Light […]

By saurabh | Posted in Air Tools | Also tagged , , , , , , , , , , | Comments (0)

Factory Reconditioned Bostitch U/F21PL Round Head 1-1/2-Inch to 2-1/2-Inch Framing Nailer includes Postiive Placement Tip

March 28, 2008 – 3:32 am

Manufacturer: Bostitch Model: U/F21PL Rating: ( reviews) List Price: $300.00 Offer Price: $139.95 Features: Tool converts to metal connector nailer in seconds with included tip Lightweight Magnesium housing weighs just 8.1 lbs More power: 1050 inch lbs for engineered lumber Tool free adjustable exhaust Patented push-button depth of drive Product Description Includes Plastic Collated Framing […]

By saurabh | Posted in Air Tools | Also tagged , , , , , , , , , , , , , | Comments (0)

DeWalt DC612KA 1-1/4-Inch to 2-1/2-Inch 12-Volt / 14.4-Volt Ni-Cad Cordless 16-Gauge Straight Finish Nailer

March 28, 2008 – 2:54 am

Manufacturer: Dewalt Model: DC612KA Rating: (1 reviews) List Price: $700.00 Offer Price: $199.99 Features: Tool works as fast as you do with consistent nail penetration into both soft and hard joints Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed Headlights provide increased visibility in low-light […]

By saurabh | Posted in Air Tools | Also tagged , , , , , , , , , , , , , , | Comments (1)